Torando Foosball Table Legs & Levelers
Besides a few of their craft furniture style tables, most Tornado models are made with either four standard square or circular legs. Most models over the years utilize the square design and come standard with either leg shims and boot or the leg leveler feature. The leg shims do come with the table so you can stack them inside the boot on the corners that need them in order to achieve a level surface. This is obviously more work than the spinning adjusters already built into the legs which is why tables with this component are typically more expensive.
The circular legs were only featured for a few years on the Storm, Cyclone and F5 during the time when Brunswick owned them and manufactured these tables overseas. Since then, this design was not reintroduced on any of the modern era products.
The circular legs were only featured for a few years on the Storm, Cyclone and F5 during the time when Brunswick owned them and manufactured these tables overseas. Since then, this design was not reintroduced on any of the modern era products.
Leg Shim & Leg Boots
The lower end tables feature this design where you insert a shim or two into the boot to level your table. We have probably all used this approach at a bar by shimming a coaster under the bottom of a table leg to keep it from rocking. While this is a pretty basic approach, the boot is there to at least keep the shim inside and prevent it from wobbling off during aggressive play. This method is less desirable and typically found on the lower end models. If you no longer have the shims or boots that came from Tornado, you can purchase replacement shims from Amazon and also leg boot replacements directly from the manufacturer. |
|
|
Replacement Adjustable Leg Levelers
If you had a higher end model it likely came with threaded spinning leveler feet that screw into a metal mounting plate at the bottom of the leg. This is rare but these can break over time, especially if you are moving your table often and the spinning leveler can be found on Amazon. Please note that you can also find the replacement metal plate it threads into from the manufacturer: |
|
|